SandBlasting Equipment & Supplies » Sandblasting

Ceramic Sandblasting Nozzles

Sandblasting Expert — Fri, 02 Sep 2011 08:55:46 +0000

Ceramic Sandblasting Nozzles

Interested in ceramic sandblasting nozzles?

If so, then you’ve came to the right place.

One of the crucial part of any sandblasting project is the proper selection of the sandblasting nozzle. A typical sandblasting process requires the selection of the suitable part for the desired goal. Therefore you need to take extra attention to:

Work to be done.

Material to be propelled

Nozzle to be used and…

Objet to be sandblasted.

So, nozzles are an important part of an A+ sandblasting project. The sandblast nozzle is recognized as the part that takes the most impact throughout any job that is done, so it is crucial that you select a sandblast nozzle of the highest quality so that it lasts for a pretty long time and still continues to provide you with the best possible abrasive quality any time you use to perform a job.

Ceramic sandblasting nozzles are one of the many different types of nozzles you can find on the market. Sandblasting provides an excellent abrasive result which gives a very good uniform finished look, but as time goes on, the equipment used for sandblasting will eventually start to wear out.
There are nozzles that are designed using many different type of materials, you can get a nozzle depending on the kind of abrasive that you employ for sandblasting.
Tungsten carbide, for example, are considered to be hard wearing metals and are used for the production of top notch sandblasting nozzle, and can also withstand the high velocities and pressures that are usually involved when sandblasting.
If you are in the process of selecting a sandblasting nozzle, keep in mind that some projects need a higher air pressure. A ceramic model nozzle can comfortably handle a relatively low level of airflow, for example 5 CFM. In order to perform bigger jobs, you will have to acquire a metal nozzle which is known to withstand a much higher level of pressure – for example, a tungsten carbide sandblasting nozzle will be able to deal with a flow of air up to 25 CFM.

This kind of things must be considered when you are thinking about using ceramic sandblasting nozzles.

Incoming search terms:

Used Sandblasting Equipment

Sandblasting Expert — Tue, 02 Aug 2011 14:45:25 +0000

Sandblasters are not the cheapest pieces of equipment you can purchase. Luckily you can acquire the same kind of equipment with minimal fuss. Used sandblasting equipment can be just as effective as brand new equipment. As long as you know that the used sandblasting equipment has been kept in good repair you can use it the same as you would new equipment. Sandblasters are used to clean metal, concrete, stucco, wood, any kind of textured surfaces really. A sandblaster works by projecting abrasive materials with much force at a surface to peel away paint or other stuck on substances. Sandblasters are primarily used to make ready a surface to be water sealed or repainted. Surfaces like brick or stone can be sandblasted to return the original look to them.

Used Sandblasting Equipment

Used sandblasting equipment can come in many types. Siphon sandblasters are used for smaller jobs and tend to be less expensive than others. A pressure pot sandblaster is used for projects that need a fast and strong blast of sand. Used sandblasting equipment should have a quality sandblasting cabinet. The cabinet is a component of the sandblaster that collects the abrasives to be reused. The abrasive falls through the holes in the shelving and are recycled into the sandblaster. If you are looking for used sandblasting equipment consider portable sandblasters if you think you will need to transport and move the sandblaster around.

Different kinds of abrasives can be employed with used sandblasting equipment. These abrasives can be: aluminum oxide; black beauty coal; glass beads; or the traditional silica sand. Used sandblasting equipment allows you the same kind of results with much less exertion than would be required with sandpaper. If you are sandblasting indoors (for example wood beams, cabinets or wood ceilings) you can use crushed walnut shells as an abrasive. Abrasives typically can be used multiple times.

You should remember that when you have new or used sandblasting equipment that the surrounding areas can be damaged. You should cover the areas you do not wish to be sandblasted. If you are sandblasting outside around neighbors you should let them know in advance so they can move their property and you should be prepared to put up tarps to protect other structures to limit property damage.

Incoming search terms:

Sandblasting Media | All You Want To Know

Sandblasting Expert — Thu, 21 Jul 2011 10:25:58 +0000

If you are looking for sandblasting media information, you’ve came to the right place. Sandblastinginfo.com is the Internet resource point on all aspects about sandblasting.

According to professional sandblaster operators:

“Sandblasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants.”

The abrasive material, also known as sandblasting media, can be formed from many different materials.

- Aluminum Oxide
- White Aluminum Oxide
- Silicon Carbide Grit
- Crushed Glass Grit
- Pumice
- Glass beads
- Plastic abrasives
- Steel Grit
- Steel Shot

And even natural elements as:

- Walnut shells
- Corn Cob

In future articles I will provide you more information about each of these specific sandblasting media and even from different sandblasting media suppliers

Incoming search terms:

Homemade Sandblaster Plans

Sandblasting Expert — Wed, 20 Jul 2011 11:37:29 +0000

If you are looking for homemade sandblaster plans you’ve came to the right place.

Do it yourself phenomenon is everywhere, and it’s not just only for economic reasons.

Consumers in general are taking matters into their own hands either because they’ve grown up finding answers on the Internet or because technology facilitates DIY projects.

This trend is here to stay. Even sandblasting area is getting more attention from “Do it yourself” enthusiasts. Recently I stumbled upon a sandblasting user showing how to create your own homemade sandblaster using very simple plans.

Here you have the video of this man and his homemade sandblaster plans.

Incoming search terms:

What is Sandcarving?

Sandblasting Expert — Tue, 28 Jun 2011 10:23:34 +0000

You may probably know that sandblasting equipment can be utilized for many other goals. In fact sandblasting technique can be used for sandcarving glass. I always tell my closest friends that sandcarving is one of the most funny hoobies you can do.

Sandcarving glass or, known as glass etching as well is an amazing activity. You can explode the artist you have inside and create works like the one that appears in this photo.

Sandcarving is fascinating because it can be done with many different materials as substrates. You can use wood, metal, stone, concrete, etc…

To make a wonderful piece of art using sandcarving technique you must complete 3 different phases.

In the first phase the layer is carved deep with very elevated pressures.
In the second one you create a dimensional look carving one deep layer and another one lighter.
In the final phase you create 3 o more layers to achieve with varied depths a 3D effect.

The more detailed the patterns are and the more phases that you do can increasingly become more complex. They also become more time demanding.

The user of the sandcarving technique can do more artistic things than they think they are capable. It only requires starting with the sandcarving to really notice how powerful and fascinating the technique of sandcarving is