SandBlasting Equipment & Supplies » Air compressor

Sandblasting At Home Dirty Tricks

Sandblasting Expert — Thu, 08 Jul 2010 07:57:26 +0000

Sandblasting is an industrial technique that propells very fine bits of material at high-velocity to clean or etch a wide range of surfaces. Although is extensively used in industrial areas you can also use sandblasting at home.

Here are my dirty tricks to use sandblasting at home without problems:

1.- First, you must prepare the zone in which you will make the work. If you don’t have a sandblasting cabinet you can easily build a homemade sandblast booth. If you want to make the sandblasting work outdoor first you must consider that the area can not be affected by the wind.

2.- Which sandblasting equipment is more appropiate to sandblast at home?

You can use sandblasting kits that will remove unwanted rust, paint and scale in no time. My main recommendation is that you don’t have bother with the small feed sandblasters like siphon blasters. I have one and it goes for about 10 seconds between fills. If you’re serious about doing big areas, you might consider one of the inexpensive 40lb blasters .

The siphon feed design sprays most abrasives including glass beads, aluminum oxide, steel grit, silicon carbide, walnut shells and more. easily removes rust, scale, and paint from parts and small equipment leaving a satin finish that will allow for further painting preparations or applying the final coat.

On the other hand, 40 Lb. pressurized abrasive blasters are better tools for sandblasting at home purposes. Pressurized design gives 30% more blasting power than siphon blasters.

3.- Always use protective accessories like sandblaster gloves and protective glasses.

Be creative and etch designs or lettering on any number of surfaces including glass tile, wood working and furniture.

Incoming search terms:

Abrasive Blasting Cleaning Equipment

Sandblasting Expert — Fri, 11 Jun 2010 07:45:53 +0000

Abrasive blasting is the process and the industrial technique with many uses. It works very simply.

“The blasting equipment forcibly propells a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants.”

Historically the most used material used in abrasive blasting is sand, but with the technological progress, sand has been substituted by silica particles. In industries that are concerned with ecological protection organic material, typically crushed nut shells or fruit kernels are utilized.

Abrasive blasting cleaning equipment is the industrial equipment specialized in cleaning any item using the abrasive blasting technique.

The principle of abrasive blasting is very elementary. Compressed air propels abrasive particles at high velocities to impact and clean a substrate.

3 main elements are found in most abrasive blasting processes:

1.- the equipment.
2.- the abrasive.
3.- the personnel.

Careful focus on these 3 basic elements is the key to the success or failure of the entire cleaning operation.

Concerning equipment, Air compressor, is the main piece of the abrasive blasting cleaning equipment. Besides it is also the element with the higher cost. Therefore selected blasting material, maintenance of used air volume and pressure are critical points.

Abrasive Blast Machine

Air compressor is the machine that compress the air used to propel the abrasive material but the abrasive blast machine mixes this compressed air with the blasting material and regulates the output pressure. For a proper functioning, the air pressure inside the blast machine must be equal to the air pressure flowing through the external piping. With an adequate use you can obtain the most benefits of an abrasive blasting cleaning equipment.

Incoming search terms:

Air Compressors – Helpful Attachments for Air Compressors

Sandblasting Expert — Thu, 31 Jul 2008 23:53:23 +0000

Let’s say you finally go to the store and invest in an air compressor. You’ve heard how great air compressors are and how helpful for home improvement they are, and you have decided that, with all the home repairs on your “To Do” list, a compressor will come in handy. Once you bring it home, however, do you know what to do with it? How exactly do you plan to utilize your tank of pressurized air? Perhaps one of a variety of handy attachments will be just what you need to begin your home repairs.

First, invest in quick connect couplers and an inflation kit. Any tools you buy will require the couplers in order to be connected to the air hose, and if your kid’s bicycle tire goes flat or he’s dying to have his brand new pool toy inflated, you’ll be glad you bought the inflation kits.

Have you ever struggled to scrub away stubborn dirt from the wheel well of your car, or laboriously tried to wipe away all the dust and cobwebs from a piece of stored furniture? If so, a blo-gun is what you need to invest in. You’ll be surprised with all the uses you find for your blo-gun. Just be sure never to point it at exposed flesh.

A nail gun is another attachment never to point at exposed flesh; however, if you’re tired of wasting energy banging away with a hammer, let your air compressor do the work for you and invest in a nail gun. You could also use an air hammer or an air drill to do jobs around the house faster and easier.

An air stapler is an energy saving attachment much like the nail gun, and you’ll be surprised at what you can find to staple. Perhaps your roof needs re-shingling? A heavy duty air stapler may be the time-saving convenience that you’re looking for.

If you like to work on cars, an air ratchet wrench or impact wrench can make your job a whole lot easier.

Even if you don’t do body work on automobiles, an air sander and a sandblaster are attachments that can come in handy. Rather than laboriously scraping away old paint chips when you repaint your house, you could save time and the strength in your arm with an air sander or a sandblaster.

Once you start to actually paint your house, a paint gun may be just what you need to cut your labor time in half and improve the quality of your workmanship.

As you can tell by the aforementioned examples, air compressors start to look a lot less daunting and a lot more promising when you realize the time and energy they can save you if you invest in a few handy attachments.

Incoming search terms:

Sandblasting Tips

Sandblasting Expert — Sun, 28 Oct 2007 14:28:29 +0000

"Here You Have Some Sandblasting Tips"

When you are surfing on internet you can find many different websites about sandblasting, but only a limited quantity of them are from sandblasting users. Most of them are only mere catalogs of sandblast companies. But recently I stumbled upon a website very useful. In this website the author writes about his personal experience using the sandblasting technique in different projects.

Christina (The writer of this blog) talks about the trials and tribulations of renovating, living in and renting a 120 year old brick 2 flat in Chicago. In one of her specific projects ( Sandblasting Radiators) she tried to sandblast some very old radiators to bring them to new life.

In my humble opinion the most important part is her personal sandblasting tips. Here you have some of them:

It is crucial before any sandblasting work (with the tools she used) to remove the vast majority of the old paint. The sandblaster she used did not work well on really thick areas of paint.
Remember to remove water from the hose and air compressor periodically. (it builds up). As the sandblasting time wore on, the efficiency decreased, possibly due to water build up.
Be well protected, and assume that despite the precautions you will have sand or grit everywhere.
Be cautious when you take breaks (ie. don’t wash hands and immediately rub your eyes, clean off the sand on your face). Optimally, you will limit your "break areas" to limit tracking sand all throughout the house.
It’s a long process, so be smart in what you focus on. Focusing on the areas that are readily seen you get a lot more bang for the time spent.

Incoming search terms:

Wood Sandblasting Kits

Sandblasting Expert — Thu, 05 Oct 2006 23:59:03 +0000

Wood Sandblasting Kits can be Used to Monogram Messages on Wood

It is Possible to Create Stunning Designs on Wood

You should know that it is possible to create stunning designs with wood sandblasting kits, of which typically include everything that is needed in order to help the user to sandblast and consists of an airbrush, some aluminum oxide abrasive, a siphon fed jar, a mask as well as a can of Propel air with regulator and an air hose.

It is also possible to use the airbrush for jewelry refurbishing, stripping or antiquing furniture as well as etching monograms on wood and much more. There are many choices open when choosing the wood sandblasting kits.

The wood sandblasting kit is ideal and makes a perfect tool when the backyard needs to be cleaned of wood. The wood sandblasting kits operate through that of suction pressure that is obtained from the air compressor in order to direct sand into the gun. By placing the tube near the end of the hose and connecting it with the gun and putting the tube into a bucket of sand and then hooking up the compressor to the gun and powering up, the wood sandblasting kit will be fully functional.

A few specifications to be noted are that air is required to be compressed at 5 cfm @ 90psi and the required hose should be 3/8” and the air inlet ¼”. The wood sandblasting kits come with the gun, nozzles, hose and metal tube and all components can be replaced, if required.

There is a wood sandblasting kit in particular as well that can be used to create beautiful designs as well as monogram messages on wood as well as etching inscriptions on plaques and awards and it can easily be used in craft work to weather wood and is called the Campbell Hausfeld AT1226 Sandblasting kit, which retails for just under fifteen dollars. This wood sandblasting kit includes a gun with ceramic nozzle and has a ten to fifteen feet material hose as well as a draw tube.

When a person needs a wood sandblasting kit he can visit any of the hardware stores in the neighborhood or look for these items in online stores where they are easily available. Most wood sandblasting kits help the sandblaster in creating fancy designs as well to weather wood and also clean unwanted wood from mechanic’s yards, if so desired.