“The blasting equipment forcibly propells a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants.”

Historically the most used material used in abrasive blasting is sand, but with the technological progress, sand has been substituted by silica particles. In industries that are concerned with ecological protection organic material, typically crushed nut shells or fruit kernels are utilized.

Abrasive blasting cleaning equipment is the industrial equipment specialized in cleaning any item using the abrasive blasting technique.

The principle of abrasive blasting is very elementary. Compressed air propels abrasive particles at high velocities to impact and clean a substrate.

3 main elements are found in most abrasive blasting processes:

• 1.- the equipment.
• 2.- the abrasive.
• 3.- the personnel.

Careful focus on these 3 basic elements is the key to the success or failure of the entire cleaning operation.

Concerning equipment, Air compressor, is the main piece of the abrasive blasting cleaning equipment. Besides it is also the element with the higher cost. Therefore selected blasting material, maintenance of used air volume and pressure are critical points.

Abrasive Blast Machine

Air compressor is the machine that compress the air used to propel the abrasive material but the abrasive blast machine mixes this compressed air with the blasting material and regulates the output pressure. For a proper functioning, the air pressure inside the blast machine must be equal to the air pressure flowing through the external piping. With an adequate use you can obtain the most benefits of an abrasive blasting cleaning equipment.

Therefore sandblasting equipment can be used for many different purposes. In general sandblasting equipment posses many specialized applications like

• The lettering and engraving on most modern cemetery monuments and markers is created by abrasive blasting.
• Sandblasting can also be used to produce three dimensional signage. This type of signage is considered to be a higher end product as compared to the flat signs. These signs often incorporate gold leaf overlay and sometimes crushed glass backgrounds which is called smalts.
• Sandblasting can be used to refurbish buildings or create works of art (carved or frosted glass). Modern masks and resists facilitate this process, producing accurate results.
• Sandblasting techniques are used for cleaning boat hulls, as well as brick, stone and concrete work. Sandblasting is used for cleaning industrial as well as commercial structures, but is rarely used for non-metallic workpieces.


Sandblasting Equipment

Different companies are there all around the world to produce these equipments in a very sophisticated manner. They have a very intelligent market network for supplying these equipments to the respective industry components.

Competition is as well high as in case any industry today.

In any case most popular sandblasting equipment are:

• Aerolyte Cabinets & Equipment
• Blast Cabinets Pulsar & BNP
• Blast Hose & Nozzles
• Blast Machine Accessories
• Blast Machines
• Blast Machine Contractor
• Blast Room Recovery Systems
• Cabinet Accessories
• Helmets & Safety Equipment
• Nozzle Holders & Couplings
• Speciality Sandblasting Equipment
]]> http://www.sandblastinginfo.com/126/sandblasting-equipment/feed/ 0 http://www.sandblastinginfo.com/116/sandblaster-gloves/ http://www.sandblastinginfo.com/116/sandblaster-gloves/#comments Mon, 17 May 2010 15:15:55 +0000 Sandblasting Expert http://www.sandblastinginfo.com/?p=116 Although information about sandblasting is more focused on sandblasting equipment and techniques, accessories are also important but they are normally forgotten.

Sandblaster gloves are utilized to reduce the risk of accidents when operating sandblasting cabinets. Yes, safety should be observed when using sandblasting cabinets, because the particles and dust material can move at very high speeds which can lead to accidents. There are a lot of sandblasting gloves out there but it is very important to choose the one that is very durable and would protect you from sandblasting accidents.

When you are searching for sandblasting supplies, you must understand that you need to shop at a place where you can trust the products and services on offer.

You must consider the following factors when you are selecting proper sandblaster gloves.

• 1.- Fitting. You need sandblaster gloves that fits properly to your hand size and to the blast cabinet you have.
• 2.- Budget. Never chose cheap material. Always select quality because your hands must be protected correctly.
• 3.- Safety. Previous factors must be subordinate to this important factor.

Finally, we do not sell directly any sandblaster gloves or accessories, but you can find many links in our website directly to great suppliers.

]]> http://www.sandblastinginfo.com/116/sandblaster-gloves/feed/ 1