SandBlasting Equipments & Supplies

Sandblasting is an industrial technique that propells very fine bits of material at high-velocity to clean or etch a wide range of surfaces. Although is extensively used in industrial areas you can also use sandblasting at home.

Here are my dirty tricks to use sandblasting at home without problems:

1.- First, you must prepare the zone in which you will make the work. If you don’t have a sandblasting cabinet you can easily build a homemade sandblast booth. If you want to make the sandblasting work outdoor first you must consider that the area can not be affected by the wind.

2.- Which sandblasting equipment is more appropiate to sandblast at home?

You can use sandblasting kits that will remove unwanted rust, paint and scale in no time. My main recommendation is that you don’t have bother with the small feed sandblasters like siphon blasters. I have one and it goes for about 10 seconds between fills. If you’re serious about doing big areas, you might consider one of the inexpensive 40lb blasters .

The siphon feed design sprays most abrasives including glass beads, aluminum oxide, steel grit, silicon carbide, walnut shells and more. easily removes rust, scale, and paint from parts and small equipment leaving a satin finish that will allow for further painting preparations or applying the final coat.

On the other hand, 40 Lb. pressurized abrasive blasters are better tools for sandblasting at home purposes. Pressurized design gives 30% more blasting power than siphon blasters.

3.- Always use protective accessories like sandblaster gloves and protective glasses.

Be creative and etch designs or lettering on any number of surfaces including glass tile, wood working and furniture.

Although information about sandblasting is more focused on sandblasting equipment and techniques, accessories are also important but they are normally forgotten.

Sandblaster gloves are utilized to reduce the risk of accidents when operating sandblasting cabinets. Yes, safety should be observed when using sandblasting cabinets, because the particles and dust material can move at very high speeds which can lead to accidents. There are a lot of sandblasting gloves out there but it is very important to choose the one that is very durable and would protect you from sandblasting accidents.

When you are searching for sandblasting supplies, you must understand that you need to shop at a place where you can trust the products and services on offer.

You must consider the following factors when you are selecting proper sandblaster gloves.

• 1.- Fitting. You need sandblaster gloves that fits properly to your hand size and to the blast cabinet you have.
• 2.- Budget. Never chose cheap material. Always select quality because your hands must be protected correctly.
• 3.- Safety. Previous factors must be subordinate to this important factor.

Finally, we do not sell directly any sandblaster gloves or accessories, but you can find many links in our website directly to great suppliers.

After reading this article on how to use a sand blaster, you will find that you have practically covered all there is to know about how to use a sand blaster.

Sandblasters are specialized machines nomally utilized to clean up walls, cars, boats and so forth. This kind of machines needs only the half the effort of using sandpaper. If you want to clean old fireplaces or simply remove paint sandblasters are the perfect solution. Four of the main types of abrasive media used in the sandblaster are aluminum oxide, glass beads, black beauty coal and silica sand.

If you are looking for a product that can restore an old object to looking like new, and you are thinking about using a sandblaster, carefully examine the following steps to learn crucial tips on how to properly use sandblasters.

Steps.

1.- Close all the valves on the sandblaster, especially the lower sand valve.
2.- Use a funnel to fill the sandblaster tank with 40 pounds of your chosen media.
3.- Set up your workstation and put on your protective clothing; welding gloves, respirator, hood and long sleeved shirt.
4.- Bleed out the machine dryers to rid them of all moisture. After the air supplies are attached turn the pressure up and regulate it at 70 pounds.
5.- Open the nozzle valve all the way. Close the sand valve. Open the main air valve and charge the tank. Open the sand air valve to 6 o’clock when the tank is pressurized. Close all other valves.
6.- Open the sand valve slowly after your nozzle is pointing in the proper direction. Safely sandblast the area with the media.

Of course, you will require some elements to apply these steps.

- Sandblaster machine.
- Funnel Abrasive media.
- Welding gloves.
- Respirator Hood.
- Long sleeved shirt.
- Air supplies and compressor.